Gateway 7400 Manual do Utilizador descarregar pdf (Página 61)

Replacing or adding memory 53

To add DIMMs:

1 Turn off the system and disconnect the power cord, modem cord (if

installed), and all external peripheral devices.

2 Observe all safety and static electricity precautions. (See “Preventing static

electricity discharge” on page 22.)

3 Remove the bezel. (See “Removing the bezel” on page 25.)

4 Remove the left side cover panel. (See “Removing the side cover panel”

on page 26.)

5 Pull open the socket latches on each side of the DIMM socket.

6 Insert the new DIMM into the socket and align the two notches in the

DIMM with the two notches in the DIMM socket.

7 Gently press the DIMM into the socket until it is firmly seated. Inserting

the DIMM automatically locks the socket latches on each end of the

DIMM.

8 Replace the bezel. (See “Replacing the bezel” on page 28.)

8508366.book Page 53 Tuesday, October 23, 2001 11:29 AM

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 155 156

Sem comentários

Gateway 7400 Manual do Utilizador Página 61