Gateway E SERIES E-6000 Manual do Utilizador descarregar pdf (Página 126)

120

Chapter 7: Adding or Replacing Components

www.gateway.com

4 Locate the old battery on the system board and note its orientation. You

will need to install the new battery the same way. For information on the

location of the battery, see “Reference Data” on page 157.

5 While pushing down on the battery release tab, place the edge of a small

flat-head screwdriver under the battery and lift the battery up until it pops

out of the socket.

6 Make sure that the positive (+) side of the battery is facing up, then press

the new battery into the socket until it snaps into place.

7 Close the case by following the instructions for your case style.

8 Turn on your computer.

9 Open the BIOS Setup utility by following the instructions in “Opening the

BIOS Setup utility” on page 122.

10 In the BIOS Setup utility, restore any settings that you wrote down in

Step 2.

11 Save all your settings and exit the BIOS Setup utility.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 189 190

Sem comentários

Gateway E SERIES E-6000 Manual do Utilizador Página 126