Gateway Server E-842R Manual do Utilizador descarregar pdf (Página 32)

CHAPTER 2: Getting Started

If you need to change drive technology, a new column of drives should be populated.

All members of the column should have the same drive type.

Drive start

With two active power supply modules installed (required), all drives start immediately.

Activating the anti-tamper locks

The anti-tamper locks are installed in the drive carrier handles and are accessed through the small

cutout in the latch section of the handle.

Drives are supplied with the locks set in the locked position.

To activate the locks:

1 Carefully insert the provided lock key into the cutout in the handle.

2 Rotate the key clockwise until the indicator is visible in the opening beside the key.

3 Remove the key.

4 To deactivate the lock, rotate the key counter-clockwise until the indicator is no longer visible

in the opening beside the key.

Column/row 1/# 2/# 3/# 4/#

#/1 - SAS 2 SATA 3 -

#/2 - SAS 6 SATA 7 -

#/3 - - SATA 11 -

Important

You cannot install a drive carrier if its anti-tamper lock is activated before installing

it into the enclosure.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 76 77

Sem comentários

Gateway Server E-842R Manual do Utilizador Página 32