Gateway 860 Manual do Utilizador descarregar pdf (Página 33)

Turning on your NAS

www.gateway.com

Turning on your NAS

After making sure that you have set up the NAS correctly and connected all

the required cables, you can turn on your NAS.

To turn on your NAS:

1 Open the control bay cover then press the power button. The NAS starts

and displays a welcome message. After that, a series of power-on self test

(POST) messages appear. The POST messages indicate whether the NAS is

running correctly.

2 If the NAS does not turn on or boot after pressing the power button, go

to the next section for the possible cause of the boot failure.

3 Aside from the POST messages, you can determine if the NAS is in good

condition by checking if the following occurred:

■ Power indicator on the front panel is green.

■ Num Lock, Caps Lock, and Scroll Lock LEDs on the keyboard are on.

Important Your default Storage Server 2003 password is “gateway”.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 95 96

Sem comentários

Gateway 860 Manual do Utilizador Página 33